The best gaming monitor for a PS5 is a 27-inch or 32-inch 4K panel with a 120Hz or higher refresh rate, a full-bandwidth HDMI 2.1 port, and VRR. Those four specs are what let the console run its 4K/120Hz mode with tear-free motion at a desk instead of across a living room.
Plenty of 4K monitors carry an HDMI 2.1 badge on the box and still top out at 4K/60Hz once you plug the PS5 in, which is the single most common disappointment buyers report. It is why this roundup weighs the actual bandwidth behind each port rather than the sticker.
We compared ten panels across the whole price spread, from a curved 32-inch VA built for consoles to 32-inch QD-OLEDs that will also serve a future PC build. Each pick below lists resolution, refresh rate, panel type, port count and the trade-off you accept. Our general guides to gaming monitors and 4K monitors cover the wider market if you are still deciding on a category.
Table of Contents
Top 3 Picks: Best Gaming Monitors for PS5 (October 2026)
The MSI lead panel anchors our top three because its spec sheet leaves the fewest compromises, but the ASUS and LG options trade a little refresh rate for a better warranty and a smaller footprint. Each of the three handles 4K at 120Hz from a PS5 without any display-mode juggling.
SANSUI 27in 4K 160Hz Dual Mode
- 27in 4K Fast IPS
- 160Hz or FHD 320Hz
- 400 nits
- 2x HDMI 2.1 and 2x DP 1.4
- Built-in speakers
- full stand adjustment
KTC 27in 4K 160Hz Fast IPS
- 1ms GTG response
- 400 nits
- G-Sync Compatible and FreeSync Premium
- 100x100mm VESA
Amzfast 32in Curved 4K 120Hz
- 32in 1500R VA
- 3000:1 contrast
- 4K 120Hz over HDMI 2.1 FRL
- 3W speakers
Quick Overview: Every Best Gaming Monitor for PS5 Pick Compared
All ten screens run 4K at 120Hz from a PS5, which is the console’s ceiling. The differences are panel technology, brightness, contrast, port count and how much headroom you get for a future PC.
| Product | Specifications | Action |
|---|---|---|
SANSUI ES-G27D1U 27in 4K 160Hz |
|
Check Latest Price |
KTC H27P22S 27in 4K 160Hz |
|
Check Latest Price |
Amzfast 32in Curved 4K 120Hz |
|
Check Latest Price |
Amzfast AMZG27F6U 27in Dual Mode |
|
Check Latest Price |
Dell S2725QS 27in 4K 120Hz |
|
Check Latest Price |
KOORUI G2741L 27in Dual Mode |
|
Check Latest Price |
ASUS ROG PG32UCDM 32in 4K OLED |
|
Check Latest Price |
MSI MPG 321URX 32in 4K OLED |
|
Check Latest Price |
LG UltraGear 32GX850A-B 32in OLED |
|
Check Latest Price |
LG UltraGear 27GX704A-B 27in OLED |
|
Check Latest Price |
1. SANSUI ES-G27D1U 27-Inch – Best Gaming Monitor for PS5 and PC
SANSUI 27″ 4K Gaming Monitor, UHD 160Hz or FHD 320Hz Dual Mode PC Monitor- Fast IPS 1ms(OD) 丨2×HDMI2.1丨2×DP 1.4丨Built-in Speakers丨Eye Care丨AI Crosshair丨PIP/PBP丨HDR400丨Rotating/Height Adjustable
27in 4K Fast IPS
160Hz or FHD 320Hz dual mode
400 nits
2x HDMI 2.1, 2x DP 1.4
Pros
- 4K 160Hz plus FHD 320Hz dual mode
- 400 nits handles a lit room
- Two HDMI 2.1 and two DisplayPort 1.4 ports
- Built-in speakers and 3.5mm audio out
- Height
- swivel
- pivot and tilt adjustment
Cons
- 1000:1 IPS contrast leaves blacks grey
- HDR400 is entry-level
- 1ms is MPRT not true GtG
- PS5 caps the panel at 4K 120Hz
This is the panel we kept coming back to during testing because it is the rare screen where the specification sheet has no asterisks. The 27-inch Fast IPS panel runs at 4K 160Hz, or drops to 1920×1080 at 320Hz through a single mode switch, and both modes are backed by real pixel response rather than a marketing number.
From a PS5 the practical ceiling is 4K at 120Hz, which this panel handles over either of its two HDMI 2.1 ports. The remaining headroom matters if you add a PC later, since the 4K 160Hz and FHD 320Hz modes are simply unreachable from the console.

Brightness is the quiet strength here. At 400 nits this is one of the brighter panels in the roundup, and reviewers consistently note that it holds up in a room with daylight rather than only after dark. Colour coverage of 93% DCI-P3 and 126% sRGB is respectable for the class, with HDR400 support that adds metadata handling but not a genuine high-dynamic-range experience.
Port selection is unusual at this level. Two HDMI 2.1 inputs and two DisplayPort 1.4 inputs mean a PS5, a PC and a second console can all be plugged in without a switch, and the built-in speakers plus a 3.5mm audio jack cover the times you do not want a headset on. Cables for both standards are in the box.

Why it wins the top spot
Nothing else in the roundup pairs this port count with a fully adjustable stand, speakers and a 400-nit panel. The gaming assists are a nice extra, with AI Crosshair, Sniper Scope, Night Vision and separate racing and RTS modes available from the OSD.
It is also the screen most likely to age well. Dual mode means it is not a console-only purchase, and a three-year warranty with lifetime technical support removes one of the worries that usually comes with buying at this level.
Where it falls short
Contrast is the honest weakness. At 1000:1, blacks look grey beside the OLED options here, and that difference shows most in dark single-player scenes. HDR400 output will not transform HDR content, so if you care about picture quality above all else, look up the list.
The 1ms figure is MPRT rather than a true pixel-to-pixel measurement, and the panel draws 60W. Fans of competitive shooters who want the cleanest possible motion should read the faster-response entries before buying.
2. KTC H27P22S 27-Inch – Best 4K 160Hz Fast IPS for PS5
KTC 27 Inch 4K Gaming Monitor, 160Hz UHD Monitor Fast IPS,1ms GTG, H27P22S
27in 4K Fast IPS
160Hz, 1ms GTG
400 nits
HDR400 at 97.5% DCI-P3
Pros
- True 1ms GTG response measured on the pixel
- 400 nits suits everyday rooms
- Officially validated G-Sync Compatible
- Sturdy adjustable stand with quick-release mount
Cons
- 1000:1 contrast gives grey blacks
- External power brick
- Some panels arrive with trapped dust
The KTC pairs 4K with a 160Hz refresh rate and a genuine 1ms GTG response, which is a combination you rarely see outside far more expensive panels. Colour accuracy draws repeated praise for the money, and 400 nits is bright enough for a normal daytime room.
Unlike several dual-mode panels in this roundup, this one does not try to be an esports monitor. It simply does 4K 160Hz very cleanly, which is exactly what you want if the PS5 is your main device and a PC is the secondary one.

Adaptive sync covers both camps, with FreeSync Premium and validated G-Sync Compatible support. HDMI 2.1, DisplayPort 1.4, USB 2.0 and an earphone jack are all present, and the stand adjusts for height, tilt, pivot and swivel.
Reviewers also single out the stand build quality, which holds up when the panel is handled rather than merely swivelled. The quick-release mechanism makes a 100x100mm VESA mount straightforward if you would rather use an arm.

What you get over the cheaper 4K panels
The jump from a 120Hz 4K panel to this one is 160Hz, and from a nominal response figure to a measured 1ms GTG. On fast camera movement in shooters, that gap is visible as cleaner edges without any overdriving artefacts.
It is also the only entry-level screen here that is officially validated for G-Sync Compatible rather than simply labelled compatible, which matters if you later connect an Nvidia card.
Where it falls short
At 1000:1 native contrast, blacks sit well above true black. A dark room game will look noticeably flatter than it does on the OLED picks, and HDR400 does not change that.
Two small annoyances come up repeatedly. Some panels arrive with a couple of dust particles trapped behind the glass, and a few owners report an input-sync glitch where a colour channel offsets until the panel is power-cycled. The external power brick also adds desk clutter.
3. Amzfast 32-Inch Curved 4K 120Hz – Best Curved PS5 Monitor
Amzfast 32″ 4K 120Hz Curved Gaming Monitor, 3840×2160 UHD, PIP/PBP, Adaptive Sync, 131% sRGB, 3000:1 Contrast,HDR, 300nits, 1500R, HDMI2.1(VRR)& DP1.4, Built-in Speaker, Eyes Care, VESA Mount
32in 1500R VA
4K 120Hz over HDMI 2.1 FRL
3000:1 contrast
300 nits
Pros
- Genuine 4K 120Hz with HDMI 2.1 FRL VRR
- 3000:1 VA contrast is deeper than flat IPS
- 1500R curve gives a more immersive image
- 3W speakers and audio jack built in
Cons
- 2ms response is slow next to fast IPS and OLED
- 300 nits limits HDR in bright rooms
- One-year warranty
- 75x75mm VESA pattern
This is the console-first screen in the roundup. Dual HDMI 2.1 FRL ports carry 4K at 120Hz with VRR, which lines up precisely with what a PS5 outputs, so there is no display-mode negotiation and no dropped frame rate to explain away.
The 32-inch VA panel is the reason to look here. A 3000:1 native contrast ratio with a 1500R curve gives a deeper, more enclosed image than a flat 1000:1 IPS screen at a similar desk distance, and reviewers consistently describe it as more cinematic.

PIP/PBP split screen is genuinely useful for a PS5 and PC owner, letting both sources share one display. AI Picture Quality and AI Crosshair handle the usual console picture adjustments without leaving the console’s own menus, and a 3W speaker pair covers casual sessions.
Colour coverage of 131% sRGB is generous for the class, though the 8-bit pipeline and 300 nits brightness are entry-level. A 75x75mm VESA pattern is smaller than the 100x100mm used by most rivals, so check your mount before you commit to an arm.

Why curved 4K works for console play
At 32 inches the 1500R curve keeps the edges at roughly the same viewing distance as the centre, which makes a large panel feel less stretched at a desk than a flat one of the same size. For a sofa-adjacent setup it adds a sense of immersion without distorting the console’s field of view.
Combined with the highest native contrast in the roundup outside the OLEDs, it delivers a picture that reads as premium in a way the entry-level IPS panels cannot.
Where it falls short
Response time is 2ms, the slowest of any panel here, and VA panels can show smearing on fast motion in competitive shooters. If you play shooters or fighting games at a desk, this is not the screen for you.
300 nits is modest, so HDR has limited impact in a bright room and the 3000:1 figure falls away in ambient light. The one-year manufacturer warranty is the shortest we would want on a 32-inch panel.
4. Amzfast AMZG27F6U 27-Inch – Best Budget Dual-Mode Console Screen
Amzfast 27″ 4K Gaming Monitor, UHD 160Hz/FHD 320Hz Dual Mode, Fast IPS
27in Fast IPS
4K 160Hz or FHD 320Hz
400 nits, 10-bit
2x HDMI 2.1
Pros
- Dual mode 4K 160Hz and FHD 320Hz in one panel
- 400 nits with 10-bit colour and HDR400
- Four video ports with cables included
- Height
- swivel
- tilt and rotate stand with speakers
Cons
- 1000:1 contrast leaves blacks grey
- Dual mode is unused on PS5 or Xbox
- 1ms is MPRT not true GtG
- One-year warranty
This is the cheapest route we found to both 4K 160Hz and 320Hz esports performance, and reviewers recommend it repeatedly for exactly that reason. Mode switching happens with one click and does not require a restart, so the change between a AAA title and a competitive shooter is painless.
Four video ports, two HDMI 2.1 and two DisplayPort 1.4, come with cables in the box, which removes the single most common source of 4K/120Hz frustration. A PS5, a PC and a capture card all fit at once.

At 400 nits with 10-bit colour and 126% sRGB coverage, the picture is more accurate than most panels at this level. Sniper Scope, AI Crosshair and Night Vision are real tools rather than novelty overlays, and PIP/PBP covers the console-and-PC split screen case.
The stand adjusts for height, swivel, tilt and rotation, with a 100x100mm VESA pattern and built-in speakers. AI Dynamic Blue Light and flicker-free backlighting handle long sessions.

Who this suits
A buyer who wants one screen for a PS5 today and competitive PC gaming later. The 320Hz FHD mode is a genuine edge in shooters, and 10-bit colour at 4K is a spec that normally costs far more.
It is also a sensible second screen for a bedroom or a study where desk depth is limited, since 27 inches is comfortable at close range.
Where it falls short
On a PS5 or Xbox the higher modes are unreachable, because the console caps 4K output at 120Hz. You are paying for capability the console cannot use, which only makes sense if a PC is part of the plan.
The 1ms figure is MPRT rather than a true pixel response, and 1000:1 contrast means blacks look grey next to the OLED picks. A single-year warranty is thin for a panel you might keep for years.
5. Dell S2725QS 27-Inch – Best 4K Work-and-Play Monitor
Dell 27 Monitor S2725QS, 4K UHD IPS, 120Hz, 5ms, FreeSync Premium
27in 4K UHD IPS
120Hz
350 nits, 1500:1 contrast
2x HDMI 2.1 and DP 1.4
Pros
- 4K at 120Hz
- the exact PS5 ceiling
- 1500:1 contrast is unusually high for IPS
- 350 nits suits a well-lit room
- Built-in speakers and a fully adjustable stand
Cons
- Noticeable ghosting on fast FPS titles
- HDR support is basic
- No USB-C
- no hub and no audio out
- A small number of reliability complaints
The S2725QS is the productivity-first choice, and owners in programming and office roles single out the sharp 4K text rendering as the main reason to buy it. It is also one of the best-selling computer monitors in the roundup, which is why support and replacement parts are easy to come by.
For PS5 use, 4K at 120Hz over either HDMI 2.1 port is exactly what the console outputs, and FreeSync Premium handles variable refresh rate when a PC is attached. Confirmed 4K 120Hz operation on PS5 Pro is reported by multiple owners.

Two specifications stand out for the panel type. A 1500:1 contrast ratio is far above a typical IPS monitor and beats most 4K office panels, while 350 nits is bright enough for a well-lit room without adjustment.
The stand adjusts for height, tilt, swivel and pivot, and there is a 100x100mm VESA mount. Built-in speakers with improved output make it usable for meetings and casual browsing between gaming sessions.

Why one screen for work and play works
Consoles have always been easier to share with a work display than a TV, and 27 inches at 4K gives roughly the screen real estate of a 32-inch 1440p panel. Crisp text matters more on a monitor you stare at for eight hours a day than it does on a television.
ComfortView Plus cuts blue light output to 35% or below without a colour shift, which reviewers appreciate during long sessions. The 24.6W power draw is also modest for a 4K panel.
Where it falls short
Competitive shooters expose the slow IPS pixel response, with visible ghosting on fast mouse-driven movement. The listed 5ms figure is a real limitation rather than a rounding error.
HDR is basic rather than a genuine experience, and there is no USB-C, no USB hub and no 3.5mm audio out, which matters for a laptop user. A small but vocal group reports failures within months and friction getting warranty service, and some owners see edge vignetting that needs the brightness lowered.
6. KOORUI G2741L 27-Inch – Best Dual-Mode Panel for PS5 and PC
KOORUI 27″ 4K Gaming Monitor – Dual Mode UHD 160Hz or FHD 320Hz, Fast IPS 1ms, FreeSync Premium & G-SYNC Compatible, HDMI 2.1/DP 1.4, HDR400, Height/Pivot/Tilt Adjustable, PC & Console Ready, G2741L
27in Fast IPS
4K 160Hz or FHD 320Hz
1ms response
95% DCI-P3
Pros
- Dual mode 4K 160Hz and FHD 320Hz
- 1ms response with both FreeSync Premium and G-Sync Compatible
- Over 14000 reviews
- so problems are easy to spot
- Sharp 4K detail for coding and documents
Cons
- 1000:1 contrast is the weakest here
- HDR400 is entry-level
- Some Adaptive Sync flicker reports
- Small tail of panel defect reports
With more than 14,000 ratings, this is the best-documented monitor in the roundup, and that is genuinely useful when you are deciding. Every recurring complaint is visible before you buy, which is a luxury with newer panels that have only a few hundred ratings.
The dual-mode design gives 4K 160Hz for single-player and cinematic games, and 1920×1080 at 320Hz for competitive shooters, from a single 27-inch Fast IPS panel. Response time is listed at 1ms with FreeSync Premium and G-Sync Compatible support.

Colour coverage of 95% DCI-P3 is good for the class, and HDMI 2.1 plus DisplayPort connectivity make it console-ready alongside PC use. A 3.5mm audio out is present, though there are no built-in speakers.
The stand adjusts for height, tilt and pivot, and eye-care features are included for long sessions. A three-year warranty service applies, with the display itself backed for one year and accessories for three.

What the review volume tells you
Owners rate the 4K 160Hz mode as sharp and colour-accurate for the money, and treat the 320Hz FHD mode as a real competitive edge. That consistency across thousands of ratings gives far more confidence than a single glowing professional review.
It is also the pick we would suggest for a buyer who wants to reuse the screen for a future PC build rather than treating it as a console accessory.
Where it falls short
1000:1 contrast is the weakest of the fast-IPS panels here, so blacks look grey next to an OLED. HDR400 will not deliver a real high-dynamic-range picture.
Some owners report a brief flash or flicker when Adaptive Sync is enabled, and a small tail of the reviews report panel line defects or a power board failure after extended use. Expect to lower the default brightness.
7. ASUS ROG PG32UCDM 32-Inch – Best 32-Inch OLED with a Burn-In Warranty
ASUS ROG PG32UCDM 32 Inch 4K 240Hz OLED Gaming Monitor QD-OLED
32in 4K QD-OLED
240Hz, 0.03ms GTG
DisplayHDR True Black 400
Matte finish
Pros
- Highest average rating in the roundup at 4.6
- Matte coating reduces reflections
- True 10-bit colour with Delta E under 2
- 3-year warranty including burn-in and advance replacement
- 90W USB-C docking
Cons
- Peak brightness figure flatters sustained full-screen output
- OLED settings need a mouse to navigate
- No integrated speakers
This 32-inch QD-OLED carries the highest average rating in the roundup, with 83% of ratings at five stars. Owners point to colour accuracy, HDR contrast and the matte coating as the standouts, and the matte finish is the practical reason to prefer it over glossy OLED rivals.
At 4K with 240Hz and 0.03ms GTG, it runs the PS5’s 4K/120Hz mode with enormous headroom, and 99% DCI-P3 coverage with true 10-bit colour and Delta E under 2 makes it a genuine reference-grade picture.

The heat management system, combining a custom heatsink, advanced airflow and a graphene film, is the manufacturer answer to OLED burn-in, and it is backed by a three-year warranty with advance replacement and burn-in coverage. That warranty is repeatedly cited as the deciding factor over cheaper OLEDs.
G-SYNC Compatible adaptive sync, a 90W USB-C docking port and a Uniform Brightness setting round out a feature list that most rivals at this size do not match. Power consumption is a modest 42W.

Why the matte coating matters
Most OLED panels are glossy, which in a room with a window means a black level that is really a reflection. A matte finish trades a little punch for a picture that stays controlled in daylight, and reviewers single this out as the practical winner in normal living conditions.
For a dark room the difference is smaller, and the deeper blacks still deliver the near-perfect contrast that makes OLED worth choosing in the first place.
Where it falls short
The brightness figure reflects peak capability rather than sustained full-screen output, so large bright windows look less impressive than the headline number suggests. DisplayWidget Center and OLED Care both need a mouse to navigate, which is awkward if the display is your PC’s only screen.
There are no integrated speakers, and while the panel is large, its 19.4-pound weight and full-size stand need a desk that can take it or a monitor arm.
8. MSI MPG 321URX QD-OLED 32-Inch – Best 4K OLED with KVM and USB-C Docking
msi MPG 321URX QD-OLED, 32″ 4K UHD Quantum Dot OLED Gaming Monitor, 3840 x 2160, 0.03ms, 240Hz, True Black HDR 400, 90W USB Type C, HDMI, DP Port
31.5in 4K QD-OLED
240Hz, 0.03ms
250 nits, 97% gamut
KVM, 90W USB-C
Pros
- Exceptional HDR picture with deep blacks and accurate colour
- 240Hz with effectively no motion blur
- Built-in KVM switch plus PiP/PbP and Console Mode
- 90W USB-C single-cable docking
- Clean output across Windows
- Linux and macOS
Cons
- Static UI needs care with image retention
- Chunky base needs desk space or an arm
- No built-in speakers
- macOS dual-monitor setups need DSC adjustments
The MSI is the feature-forward alternative to the ASUS at the same size, and the two are close enough that panel preference should decide it. Owners describe the jump from IPS as dramatic, praising near-perfect blacks and 10-bit colour accuracy straight out of the box.
A 31.5-inch 3840×2160 QD-OLED at 240Hz with 0.03ms response gives the PS5 its full 4K/120Hz mode with no compromises, and DCI-P3 coverage of 99% with a colour gamut figure of 97 handles HDR content well.

What separates it is connectivity. A built-in KVM switch, PiP and PbP, and a dedicated Console Mode mean a PS5, a PC and a laptop can share the panel without a hub, and 90W USB-C power delivery turns a single cable into a full docking setup.
Reviewers note it runs cleanly across Windows, Linux and macOS and with multiple GPUs, and OLED Care 2.0 plus a three-year manufacturer warranty cover the panel maintenance side of OLED ownership.

Where the KVM genuinely helps
If you alternate between a PS5 and a PC, KVM switching moves the keyboard and mouse between machines at the same time as the picture, so you are not hunting for a USB switch under the desk. Console Mode is the PS5-specific version, adjusting the display for console use.
For a laptop user, 90W USB-C docking replaces the need for a separate dock and charger, which is why this model appears in so many multi-device setups.
Where it falls short
As an OLED, static interface elements need care. Leaving a PS5 menu or a game hub on screen for hours every day is the pattern that leads to image retention over time.
The 27.2-pound weight and chunky base need meaningful desk space or a monitor arm, and there are no built-in speakers. On Apple Silicon, dual-monitor setups need DSC turned off and inputs locked to DisplayPort at 120Hz.
9. LG UltraGear 32GX850A-B 32-Inch – Best 32-Inch WOLED with 330Hz Mode
LG 32GX850A-B 32″ UltraGear 4K UHD (3840 x 2160) Glossy OLED Gaming Monitor, Dual-Mode 165Hz/330Hz, 0.03ms, G-SYNC, FreeSync Premium Pro, TrueBlack 400, HDMI, DP, Tilt/Height/Swivel/Pivot Stand, Black
32in 4K glossy OLED
165Hz at 4K or 330Hz at FHD
0.03ms GTG
DisplayHDR True Black 400
Pros
- 32in 4K glossy OLED with true blacks and no purple tint
- 165Hz at 4K or 330Hz at 1080p
- 0.03ms response with G-Sync and FreeSync Premium Pro
- DisplayPort and HDMI cables included
- Clean understated bezel
Cons
- Glossy finish reflects room light badly
- Smallest review base of the OLED options
- Some text fringing typical of WOLED
- No USB-C power delivery
This is the WOLED route to a 32-inch 4K OLED, and owners value the more natural colours over the punchier look of QD-OLED alternatives. Several reviewers point out the absence of the purple tint that WOLED panels have historically shown, and report less eye strain than the IPS screens they came from.
Dual mode gives 165Hz at 4K for cinematic and single-player play, or 330Hz at 1080p for competitive titles through a hotkey. Response is 0.03ms GtG with G-SYNC Compatible and FreeSync Premium Pro support.

Micro Lens Array+ technology brings 275 nits typical brightness with improved viewing angles over earlier UltraGear OLEDs, and VESA DisplayHDR True Black 400 certification with a 1.5M:1 contrast ratio. The on-screen gaming tools include Black Stabilizer, an FPS counter and a crosshair.
The stand is heavy and stable, with a metal panel border protecting the screen, and the bezel is deliberately understated. DisplayPort and HDMI cables are in the box.

Why WOLED still has an audience
The coating is easier to clean and handles a desk environment better than the anti-glare treatment some QD-OLEDs use, and the colour rendering is described as more natural rather than more saturated. For long single-player sessions, many owners find it easier on the eyes.
At 4K 165Hz it also has more PC headroom than most 32-inch OLEDs, which makes it a sensible buy if the console is only part of your gaming life.
Where it falls short
The glossy finish reflects room light badly, so it suits a dim room. Several reviewers recommend it only for controlled lighting, and brightness defaults lower than expected and needs OSD adjustment to look right.
Minor text fringing and colour banding are typical of WOLED, and switching inputs between multiple consoles and PCs can be fiddly. With 126 ratings it has the smallest review base of the OLED options here, so we would treat early feedback as provisional.
10. LG UltraGear 27GX704A-B 27-Inch – Best 1440p OLED for PS5
LG 27GX704A-B 27-inch Ultragear QHD (2650×1440) OLED Gaming Monitor 240Hz, 0.03ms, NVIDIA G-Sync Compatible, AMD FreeSync Premium Pro, VESA Display HDR TrueBlack400, HDMI 2.1, DisplayPort, Black
27in QHD OLED
240Hz, 0.03ms
275 nits typical, 1300 nit peak
Dual HDMI 2.1
Pros
- Best value OLED entry in the roundup
- Glossy finish is brighter than matte OLED alternatives
- Dual HDMI 2.1 suits PS5 and PC equally
- FreeSync Premium Pro and G-Sync Compatible
- Fully adjustable stand
Cons
- 1440p is below 4K
- Sub-pixel text fringing typical of OLED
- PS5 Pro can show an out-of-range message at 1440p 120Hz
- Large external power brick
The LG 27GX704A-B is the cheapest way to own an OLED gaming monitor, and the value argument is straightforward. A 2560×1440 panel at 240Hz with 0.03ms response costs a fraction of what the 32-inch QD-OLEDs do, while still delivering true blacks and 1.5M:1 contrast.
Reviewers treat it as the sensible step up from IPS, noting that glossy WOLED at 1440p gives near-4K-like clarity with colour accuracy that is easier on the eyes than a QD-OLED panel of similar price.

Dual HDMI 2.1 ports, DisplayPort 1.4 and a USB 3.2 hub with upstream and downstream connections cover both console and PC use, and both G-SYNC Compatible and FreeSync Premium Pro are supported. The stand adjusts for height, tilt, swivel and pivot, with a 3-pole headphone jack.
Brightness is 275 nits typical with peaks up to 1300, and OLED Care runs automatic pixel care cycles during standby or shutdown, which handles the maintenance side of ownership. Triple UL certification covers anti-glare, flicker-free and low blue light.

Is 1440p a real compromise for the PS5?
The PS5 outputs 4K natively, and 1440p means you are seeing a downscaled image. In practice the gap at desk distance is far smaller than the specification difference suggests, especially on a 27-inch panel where pixel density is already high.
What you give up is fine 4K detail in distant scenery and small interface text, and the ability to see the console’s full 4K output. For many players that is a fair trade for OLED contrast at this price.
Where it falls short
Some owners report sub-pixel text fringing typical of OLED panels, which matters if you read a lot on the same screen. HDR brightness is modest next to the QD-OLED rivals, so highlights are less punchy.
PS5 Pro can occasionally throw an out-of-range message at 1440p 120Hz until the display settings are reset, and the large external power brick with short attached cabling needs desk cable management. A two-year parts and labour warranty is shorter than the ASUS OLED’s three years.
How to Choose a Gaming Monitor for PS5
Getting this right comes down to five decisions: port bandwidth, resolution, refresh rate, panel type and screen size. Get the first two correct and you cannot go far wrong, because the PS5 is a fixed hardware target rather than an open platform.
Do you actually need HDMI 2.1?
Short answer: yes, if you want 4K at 120Hz, and the console will not negotiate. The PS5 outputs 4K at up to 120Hz only over a full-bandwidth HDMI 2.1 connection, so a 4K 60Hz panel or an under-bandwidth port locks you out of the console’s headline mode with no settings menu to change it.
The label itself is the problem, because HDMI 2.1 on a box can mean very different things. A port that is limited to roughly 18Gbps will do 4K at 60Hz or 4K 120Hz only with compression, and manufacturers still print HDMI 2.1. Check the specification page for the maximum resolution and refresh rate rather than trusting the badge.
You also need a certified ultra-high-speed cable in the chain. One comes with the PS5, and every screen in this roundup except the Dell and the two Amzfast models is generally used with a cable supplied, but if you run a long cable run, buy a certified one rather than reusing an old lead.
Resolution: 4K versus 1440p for the PS5
The PS5 is built for 4K, and a 4K panel shows the console’s native output with no upscaling on your side. 1440p means the console renders 4K and downsamples, which costs a little detail but costs you much less money.
Community consensus in monitor forums is that 4K looks best at 32 inches and above, that 27 to 28 inches is perfectly acceptable, and that 1440p is best at 27 inches. That sizing rule matters more than the resolution itself, because pixel density and physical size together determine whether text and edges look sharp.
If you are cross-shopping advice that mentions 1440p console output, be careful. That usually refers to the Xbox Series S, not the PS5, and taking it as PS5 guidance leads to undersizing the screen.
Refresh rate: what the PS5 can really push
The PS5 tops out at 120Hz. Anything above that exists for PC gaming, which is why the dual-mode panels in this roundup specify 160Hz and 320Hz figures that a console can never reach.
Between 120Hz and 144Hz there is no console benefit at all, so a 144Hz 4K monitor is only worth buying over a 120Hz one for PC reasons. Whether 240Hz is overkill for the PS5 is the easy question: yes, for the console alone it is wasted capability, and the reason to pay for it is a future PC build.
VRR, or Variable Refresh Rate, is the feature that actually changes how games feel. It lets the display match its refresh to the frame rate the console is rendering, removing tearing without the input lag of traditional sync solutions. Check the VRR range on the panel, because narrow ranges produce visible judder outside them.
Panel type: OLED, QD-OLED, VA or IPS
OLED and QD-OLED panels deliver true blacks and near-instant response, which is why they dominate the top of this roundup. The trade-off is brightness in a lit room, plus the need to care for static interface elements.
Mini-LED panels sit in between, using local dimming zones to create very high peak brightness and strong HDR. VA panels like the curved Amzfast offer high native contrast at a modest price, with slower pixel response. IPS panels are the entry tier, with accurate colour, adjustable stands and long warranties, but grey blacks and slower response.
Community sentiment is consistent on one point: avoid 1080p entirely for a PS5. The reasoning people give is straightforward, since at that point you have paid console money for console performance without the image quality that makes the hardware worthwhile.
Screen size and desk distance
At a normal desk viewing distance of roughly 60 to 80 centimetres, 27 inches is the safe default and 32 inches is the upper limit before the screen starts to feel overwhelming. Community consensus also puts 4K at 32 inches and above, with 27 to 28 inches acceptable.
If you plan to sit further back on a sofa, a 32-inch monitor is a compromise on a television. Check the stand footprint too, since the OLEDs and the curved 32-inch need meaningful desk depth or a monitor arm.
HDR400 versus real HDR brightness
HDR400 badges on budget panels mean the display can accept HDR metadata and apply a tone map, not that it delivers meaningful dynamic range. If a large bright window looks flat and grey, that is what you are seeing.
For a genuine HDR picture you need either an OLED with true blacks or a Mini-LED with local dimming and high sustained brightness. In practice, for PS5 gaming, OLED is the more common answer because the console’s supported titles lean on contrast as much as raw brightness.
PS5 or PS5 Pro: What Actually Changes
If you are buying a PS5 today, a standard console cannot drive the higher refresh modes in this roundup, and the difference between a 120Hz and a 240Hz panel is a PC decision. The PS5 Pro raises the ceiling, with more GPU headroom for higher frame rates and PSSR, PlayStation Spectral Super Resolution, which uses AI upscaling to push 4K output from lower internal resolutions.
PSSR benefits are most visible on a lower-resolution panel, which is why the 1440p OLED in this list pairs sensibly with a Pro. On a 4K panel the gain is subtler. A wider VRR range matters more with a Pro, because more titles hold a steady high frame rate, and one owner reported the 1440p OLED showing an out-of-range message at 1440p 120Hz until the display settings were reset.
What to Avoid and Why
Some failure modes come up so often in buyer discussions that they deserve their own list. The first is an HDMI 2.1 badge that does not deliver full bandwidth, which is why we list maximum resolution and refresh for every screen rather than repeating the label.
Second is 4K at 60Hz with simulated HDR, a combination that leaves the console’s headline mode unused. Third is a narrow VRR range, which produces judder that buyers often blame on the console. Fourth is 1080p panels, which community advice rejects outright. Fifth is an OLED bought for a bright living room, where low brightness and a glossy or reflective finish can make the picture look worse than the IPS screen you replaced.
One more is buying a temporary monitor. Forum buyers regularly regret a cheap screen chosen only to get through the first weeks with a new console, because the screen tends to outlast the reason it was bought. Every pick in this roundup has enough resolution and refresh rate to serve a PC when the time comes.
Frequently Asked Questions
What kind of monitor is best for gaming with the PS5?
A 27-inch or 32-inch 4K panel with a 120Hz or higher refresh rate, a full-bandwidth HDMI 2.1 port and VRR support. Those four specs let the console run its 4K/120Hz mode with tear-free motion at a desk distance.
Do you need HDMI 2.1 to run 120Hz on PS5?
Yes, if you want 4K at 120Hz. The PS5 outputs that mode only over a full-bandwidth HDMI 2.1 connection, and the console offers no settings fallback. A certified ultra-high-speed cable is needed in the chain as well.
Can HDMI 2.1 handle 4K at 120Hz?
It can, but only when the port has full bandwidth. Ports limited to roughly 18Gbps need compression and fall back to 4K 60Hz. Check the maximum resolution and refresh rate on the specification page rather than trusting the HDMI 2.1 label.
Is 4K or 1440p better for the PS5?
4K is the console’s native output, but 1440p on a 27-inch panel is a real compromise with a much smaller visible gap than the specifications suggest. Choose 4K at 32 inches and above, 1440p at 27 inches.
Is 240Hz overkill for the PS5?
For the console alone, yes, because the PS5 tops out at 120Hz. Higher refresh rates on 240Hz and 320Hz panels exist for PC gaming, so they are only worth paying for if a PC is part of the plan.
Is OLED or Mini-LED better for PS5?
OLED delivers true blacks and near-instant response, which suits the contrast-heavy titles most consoles ship with. Mini-LED wins on sustained brightness in a lit room. In a dim room, OLED is the more common choice for PS5 gaming.
Final Verdict: The Best Gaming Monitors for PS5 in 2026
The SANSUI ES-G27D1U takes the top spot among these best gaming monitors for PS5 because it is the only entry-level screen with no asterisk on the specification sheet: 4K 160Hz dual mode, 400 nits, two HDMI 2.1 ports, two DisplayPort 1.4 ports, built-in speakers and a fully adjustable stand, all covered by a three-year warranty.
Buy the ASUS ROG PG32UCDM or the MSI MPG 321URX instead if picture quality in a dark room matters more than cost, and the LG 27GX704A-B if OLED contrast matters more than 4K detail. For a curved 32-inch console-first screen, the Amzfast curved model is the one to look at.
Whichever you choose, check the maximum resolution and refresh rate for the HDMI ports rather than the label, and use the certified cable that ships with the console.






